Brand New Delco 4×10″ Aftermarket Speaker Recone Kit 10 Ohm. Parts specifications:
- Cone: 4×10″outside diameter, .750″ deep, 1.0″ voice coil opening, all paper
- Voice Coil: .875″ inside diameter, .750″ form length, .250″ windings width, 10 ohms
- Cup Spider: 2.188″ outside diameter, .870″ VC opening, .219 cup height
- Dustcap: 1.1″ paper lip down
- Gasket: chip 4×10″ outside diameter
- Pigtails, shims, and instructions are included.
**Modifications needed: The voice coil opening for the cone is 1” while the voice coil itself is .875”. This means you will need to attach the voice coil to the spider and also attach the cone to the spider and add a very light coat of epoxy to fill in the space. Lightly apply the epoxy and turn the speaker facedown. Check to be sure the epoxy does not run down the cone.
Measure your voice coil, 1″ VC size is also available (see below).
Recone kit parts are subject to availability. Some parts will require 6-10 day lead time. Specific parts and specs are subject to change. Replacement parts will match as closely as possible.
Compare your parts to the specs listed! If you receive your parts and discover that changes are needed there will be additional charges for parts and shipping. If you have any questions, please contact us.