Delco 4×10 Speaker Recone Kit 10 ohm 1″ VC
$44.00
Description
Parts specifications:
- Cone: 4×10″ with paper surround .750″ deep, 1.0″ VC
- Kapton Voice Coil: with 1.030” inside diameter, .750″ VC form length, .250″ windings width, 10 ohms
- Cup Spider: 2.250” wide with 1.0″ vc opening .125″ tall
- Dustcap: Paper 1.100″
- Gasket: 4×10″ Chip
- Pigtails, shims, and instructions are included.
You will also need glue and epoxy
These recone parts fit for most Delco 10 ohm 4×10″ speakers. Measure your original parts and compare to the specifications listed here to determine if these parts will work for you. We also have a speaker recone kit with .870″ voice coil size.
Additional information
| Weight | 0.60 lbs |
|---|---|
| Dimensions | 4 × 10 × 1 in |
Reviews (1)
1 review for Delco 4×10 Speaker Recone Kit 10 ohm 1″ VC
Add a review
You must be logged in to post a review.
Related products
-247x296.jpg)
James Shine (verified owner) –
Great kit with top quality components. But a quick tip to those reconing late 60’s Chrysler speakers. The cone is a bit shallower than what we need. To make it work you need a voice coil 1″ in diameter, but also 1 1/4″ tall. Or a proper cone depth. You can work around it. Just giving a heads up. Perhaps the vendor can offer a Chrysler version for us someday.
Cathy –
You are correct. You have to modify the current parts that are available because many of the original parts are obsolete. That is the challenge behind repairing some vintage speakers. Glad to see you met the challenge.