Brand New Genuine Fender/Oxford Alnico 6EV-34 6″ Aftermarket Recone Kit. Parts specifications:
- Cone: 6″ outside diameter, .990″ deep, .805″ voice coil opening
- Voice Coil: .751″ inside diameter, .750″ form length, .219″ windings width, 8 ohm
- Cup Spider: 1.915 outside diameter, .750″ VC opening, .191″ cup height
- Dustcap: 1.25″ outside diameter, felt, lip up
- Gasket: 6″ one piece round
- Pigtails, shims and instructions are included.
You will also need glue, and epoxy which are sold separately.
Questions about how to repair? See Reconing Video and Reconing FAQ’s
Recone kit parts are subject to availability. Some parts will require 6-10 day lead time. Specific parts and specs are subject to change. Replacement parts will match as closely as possible.
Compare your parts to the specs listed! If you receive your parts and discover that changes are needed there will be additional charges for parts and shipping. If you have any questions, please contact us.
martin.halstead (verified owner) –
Reconed a 10″ alnico blue from a Blues Deville with this kit last weekend. Went without a hitch. This kit has the plastic coil former, which is less likely to deform than the paper original (which is why the speaker had to be reconed in the first place). Be sure to note how much the coil former protrudes through the cone on the original as there is not much else to guide you as to coil height. Also remember that the best combination of shims may be two thinner ones used together. At the moderate testing volumes I used, could hear no difference in tone between the reconed version and one of the still-working originals.
Cathy –
Congratulations on a successful repair and thank you for sharing your experience. I’m sure your advice will help other future reconers.