Pioneer 12″ 30-733A-1 Aftermarket DIY Recone Kit HPM100
$64.00
Description
Brand New Pioneer 12″ 30-733A-1 Used in HPM100 Aftermarket DIY Recone Kit parts specifications:
- Cone 12″ accordion edge, 2.375″ deep, 2.5.00″ voice coil opening.
- Voice Coil with 2.580″ inside diameter, 1.875″ vc form length, 1.000″ windings width, 8 ohms. If too high, vc can be shortened. email us for info)
- Flat Spider 6.981″ wide with 2.500″ vc opening (outside edge might need to be trimmed)
- Dustcap screen 3.875″ wide
- Reuse the original Gasket
- Pigtails, shims, and instructions are included.
- You will also need glue, epoxy, and latex.
***The spider’s voice coil opening will need to be enlarged to allow the cone to drop low enough for the cone’s surround to contact the frame. The spider will need to be glued to the cone after its voice coil opening has been enlarged. Click HERE for example****
This is a difficult repair. if you prefer to send to us we are happy to repair for you.
Questions about how to repair? See Reconing Video and Reconing FAQ’s
Specific parts and specs are subject to change but replacement parts will be matched as closely as possible.
Additional information
| Weight | 2 lbs |
|---|---|
| Dimensions | 12 × 12 × 4 in |
Reviews (1)
1 review for Pioneer 12″ 30-733A-1 Aftermarket DIY Recone Kit HPM100
Add a review
You must be logged in to post a review.
Related products
-247x296.jpg)
-247x296.jpg)
captronof8 (verified owner) –
After a few modifications the product worked well. Brought new life to the speaker….Very happy with this kit.. I would give it 4stars out of 5..
Cathy –
Great news. Glad you were able to make this work for you. Many of the speakers that require metric measured parts do require adjustments. Modification is the key.