RAMSA EAS-30PL123S 12″ Aftermarket Recone Kit

Brand New RAMSA EAS30PL123S 12″ Aftermarket Recone Kit 8 ohm. Parts specifications:

• Cone: 12″ outside diameter, 3.0″ deep, 1.750″ VC opening, accordion edge
  
• Voice Coil: 1.792″ inside diameter, 1.625″  form height, .475″ wind width, 8 ohm
• Flat Spider:  5.508″ outside diameter, 1.0″ VC opening – open to 1.792″
  
• Dustcap: 3.2″ outside diameter, Paper Dome
• Gasket x2: 12″ one piece, .25″ thickness (2 sets included)
  glue one gasket to frame under cone and the other on top of cone
• Pigtails, shims and instructions are included.

***NOTES ABOUT INSTALLATION: Glue one of the gaskets to the frame before reconing to lift cone off frame edge***

You will also need glue, epoxy, and latex which are sold separately.

*This is not the recone kit for the RAMSA EAS30PL143A*

Questions about how to repair? See Reconing Video and Reconing FAQ’s

Recone kit parts are subject to availability. Some parts will require 6-10 day lead time. Specific parts and specs are subject to change. Replacement parts will match as closely as possible. 

Compare your parts to the specs listed! If you receive your parts and discover that changes are needed there will be additional charges for parts and shipping. If you have any questions, please contact us.