Ohm Model “F” Speaker Deisgn

OHM-F-DSCN3606-4-150x150

The Ohm model “F” speakers invented by Lincoln Walsh feature a single driver mounted vertically as though it were firing downwards into the top of the cabinet, but instead of the normal almost flat cone, having a very-much extended cone entirely exposed at the top of the speaker. This turned normal speaker driver design problems on their head; whereas the normal problem with designing a driver is how to keep the cone as stiff as possible (without adding mass), so that it moved as a unit and did not become subject to traveling waves on its surface, the Ohm drivers were designed so that the entire purpose of the electromagnetic driver was to generate traveling waves that traversed the cone from the electromagnet at the top downwards to the bottom. As the waves moved down the truncated cone, the effect was to reproduce the omnidirectional soundwave, as with a cylinder that changed diameter. This created a very effective omnidirectional radiator (although it suffered the same “planarity” effect as ribbon tweeters for higher-frequency sounds) and eliminated all problems of multiple drivers, such as crossover design, phase anomalies between drivers, etc. However, in practice it was found necessary to use a very complex cone made up of various materials at different points along its length, in order to maintain the waveform traveling evenly.

 

Leave a Reply